|
My Pool volume is ___ Cubic metres.
Circle or highlight the column in the Pool Top Off chart below that most closely corresponds to your pool volume. Use this column every two weeks when you add PristineBlue to your pool.
Every two weeks
- Adjust total Alkalinity an pH as necessary.
-
PH 7.2-7.6
-
Total Alkalinity 30-90pp
-
Test PristineBlue (copper) level and top off according to the chart below.
-
Shock with 120 grams of PristinePower for each 10 cubic metres of water. You may wish to shock as often as once a week if bather loads are high. Add ___ kg's PristinePower.
-
Add 60ml of PristineClean for each 10 cubic metres of pool water. Add ___ Litres of PristineClean..
PristineBlue, PristinePower and PristineClean may be added directly to the pool water without mixing. Do not pour through Skimmer. It is necessary to wait between application of the different products. It is safe to swim immediately after adding PristineBlue and PristineClean, but you should wait about 15 minutes after adding PristinePower to allow bathers to enter the water.
Table 1
| POOL TOP OFF CHART |
PristineBlue
Level
|
Cubic Metres
m³
|
10
|
25 |
50
|
100 |
300
|
500
|
Litres of PristineBlue to Add
|
0.9 ppm
|
0
|
0
|
0
|
0
|
0
|
0
|
0.8 ppm
|
0.016 |
0.04
|
0.08
|
0.16
|
0.64
|
0.80
|
0.7 ppm
|
0.032 |
0.08
|
0.16
|
0.32
|
0.96
|
1.56 |
0.6 ppm
|
0.048 |
0.12
|
0.24
|
0.48
|
1.44
|
2.38
|
0.5 ppm
|
0.064 |
0.16
|
0.32
|
0.64
|
1.91 |
3.18
|
0.4 ppm
|
0.088 |
0.22
|
0.44
|
0.88
|
2.61
|
4.35
|
0.3 ppm
|
0.100
|
0.25
|
0.50
|
1.00
|
3.00
|
5.00
|
0.2 ppm
|
0.116 |
0.29
|
0.58
|
1.16 |
3.48
|
5.81
|
0.1 ppm
|
0.132
|
0.33
|
0.66
|
1.32 |
4.00
|
6.60
|
Note: Do Not add PristineBlue more often than every two weeks. When PristineBlue is topped of more often than once every two weeks, you spend more money than is necessary on PristineBlue and risk overdosing and staining the pool.
|
